Introduce the SHIFT button
This is the SHIFT button, it is used for several things: * Single press: it’s pause or unpause the Neova * Single press and hold: you can change the gesture bank, while holding the SHIFT button, you can press the other button to select another bank. The Hub stores 4 gesture banks and each holds up to 4 gestures.…
Did you know what's indicate colored LED on the hub?
**NORMAL MODE: FULL COLOR LED** Here is the normal mode, each color represent a dedicated gesture: ![][1] _Gestures color_ You can mute or unmute each one of them by clicking on the corresponding button. ![][2] _Normal Mode_ **CONNECTION LOST: WHITE LED BLINK** There is no more communication between the hub and …
Which operating systems are supported by Neova?
The Dashboard Software works on MacOS (10.8 and later) and Windows 10.
How long can the Neova HUB and Ring be moved apart from each other?
The Neova HUB and Ring should not be moved more than 5 meters (around 16 feet) apart from each other. You may experience a connection loss if they are moved further apart. If so, moving them closer will let them reconnect.
Am I wearing my Neova Ring the right way?
Ensure your wear your ring with the thinner part facing your left, as displayed by the following figure: ![][1] If in doubt, you can create a Roll or Pitch Bend gesture from the Dashboard and make sure the indicator accurately follows your hand’s movement. [1]: https://lh3.googleusercontent.com/CIoAst5BKHfv7EEkT…
Can I use other instruments with Neova?
Neova is a MIDI controller compatible with any device that supports MIDI. This means you can use it with DJ turntable, electric drums or even guitar MIDI pedals.
How do I upgrade my software?
If an update is available, a notification screen will let you download and install the latest Dashboard version on start up. If you want to update the Software later, a notification on the menu button will remind you about that the update is available. To upgrade your software, go to the menu under the “Updates…
What is Neova’s latency?
Thanks to our proprietary protocol, the latency between Neova’s HUB and Ring is less than 1ms.
How do I upgrade my Neova Firmware?
A notification on the menu button will tell you that new firmware releases are available. To upgrade your firmware, go to the menu under the “Updates” tab, and click on the Upgrade Fimware button. Make sure your Neova HUB is connected to your computer, and that your Ring charges during the process.
How long does it take to fully charge the Neova Ring?
It takes around 1 hour and 30 minutes to fully charge the Neova Ring.
